High-tech Energy-efficient Guest Rooms with TIS- Energy management in hotels is really a challenging issue for owners. From the desired temperature to their favorite light level, guests will probably return for another stay when they can customize their room to suit their preferences. However, providing these functions using old technology wastes a lot of energy. As an example, there are plenty of issues with the old card key switches. Guests can put any card within the old switches, or they might ask for more than one card. Even when hotel desk refuses to give more than one card to a guest, she/he might claim to have lost the card.
The conventional old technology of hotel card switch. There is also a great deal of over usage of lights and AC energy due to things running even though guests aren’t inside their rooms, which could cause a financial loss for that owner. Of course, no hotel owner wants to prohibit guests from using a comfortable stay, nor do owners expect guests to get in a dark or cold hotel. Nobody is to blame. Both guests and hotel owners have the right to fulfill their interests.
Some hotel owners think if they separate the AC through the main network, less energy will be consumed, while others believe that motion sensors would be the solution. However, these approaches forget to resolve the issue. The AC is regarded as the energy-consuming device of all, and motion sensors may be nightmares since they only function based upon movement detection, which means that the AC and lights might go off while a guest is sleeping or reading a novel. Nightmarish!
The TIS Automation Company offers the best answer for hotel guest rooms by introducing its innovative technology in a smart ceiling sensor: Energy Servant. Our Energy Servant blows past classic hotel card switches with its capability to detect human presence in a room. This ceiling-mounted sensor has several options, together with a PIR motion sensor, a light harvest sensor, 2X digital inputs, infrared emitters appropriate for all split AC types, TV brands infrared codes, temperature sensor, 24X flags, and 32 lines of logic and timers.
TIS Energy servant, the brand new way for hotel energy saving technology. By installing this door sensor in the entrance to some room, connecting it for the Energy Servant’s digital input, and programming the logic lines, the issue of room occupancy is completely resolved.
The subsequent logics could be defined for this sensor to control room energy without the discomfort for guests:
Logic 1: When there is any movement within the room, the occupancy mode is going to be on.
Logic 2: When the main door is opened and closed, a flag will activate for one minute to ascertain if there exists movement in room. If no movement is detected after 1 minute, the system will activate energy-saving mode. This can be useful in situations each time a guest enters the area briefly. In energy-saving mode all lighting is off except for a nightlight, which stays on for three hours just in case there is another guest getting a nap. Also, the AC is definitely not switched off, however its temperature is going to be decreased by 2 degrees. This helps save energy with time.
Logic 3: In the event the energy-saving mode is enabled and no movement is detected for over 3-5 hours, the nightlight and AC will likely be turned off automatically. It is additionally possible to define lower temperature levels for your AC. Additionally, the vitality Servant can change the AC on/off if it recognizes that a balcony window/door is open. All this requires is adding a magnetic contact linked to the balcony window/door and programming the desired smart decision. The lighting harvest sensor helps save energy by wscgid balcony lights off if there is enough natural light.
Another practical and beneficial capability of this sensor is its built-in thermostat, that helps keep up with the right temperature all the time. This will be significant for keeping furniture fresh and intact. Also, in hot spots and even if the room is empty for a long period, humidity and bad smells will never turn into a problem inside the room. This sensor may be developed to alter AC to dry mode when the room temperature reaches or exceeds 28-30C degree. This could happen repeatedly throughout the day if necessary. An identical performance may be programmed in cold spots to avoid mold.
Another choice with this smart device is TV control. If the hotel provides the guest having a room tablet, she/he has the capacity to control the room’s TV with it. This sensor was set up in 20 rooms inside the Fairmount Blue Mountain Hotel in Sydney. The end result was considerably enhanced energy management and several satisfactory comments from guests who enjoyed their luxurious stay at this hotel.
TIS offers the chance to meet both hotel owners and guests interests and needs with only a few items as well as in probably the most energy-efficient possible way. For additional information or even to plan a consultation, contact us at www.tiscontrol.com